Residential License #890459  ·  Commercial License #3667Serving Greater New Orleans  ·  504-380-9681

In most cases, yes. Orleans Parish and the surrounding parishes typically require a permit before you build or replace a fence, though some short fences and minor repairs are often exempt. The exact rule depends on your fence height, your parish, and whether your property sits in a historic district, so the only way to know for certain is to check with your local Safety and Permits office before work begins.

Nobody wants to pour a weekend into building a fence only to get a stop-work notice taped to the gate. Permit rules for fencing catch homeowners off guard, because they vary parish to parish and sometimes block to block. Orleans Parish has its own process, Jefferson Parish has another, and historic neighborhoods inside New Orleans layer on extra review most homeowners never see coming. This guide walks through when a permit is required, what height has to do with it, and how HOA, historic-district, and permitting rules stack together. The team at TurnKey Fences handles this process daily across the metro, so we are laying out what we tell our own customers.

When a Fence Permit Is (and Isn’t) Required

Fence post being set in concrete during installation

Most parishes in the greater New Orleans area require a permit any time you build a new fence, replace a significant stretch of an existing one, or change its height or location. A handful of situations are often exempt, such as a very low decorative edging fence or a small repair that does not change the footprint. But “often exempt” is not the same as guaranteed, and the threshold for what counts as a repair versus a replacement differs by jurisdiction, so treat every project as permit-required until your local permitting office tells you otherwise. Building without a required permit can mean a stop-work order mid-project, a fine, or tearing down and rebuilding a fence that does not meet code, none of which is worth skipping a short phone call.

How Fence Height Affects Your Permit

Height is usually the single biggest factor in whether a permit applies and how closely your project gets reviewed. Many parishes set lower thresholds for front-yard fences than for side and rear fences, since a tall fence facing the street affects sightlines and neighborhood character more than one tucked along a back property line. A standard 6-foot privacy fence in a backyard is common, but pushing to 8 feet for extra privacy or wind resistance often triggers a closer look or a different permit category. Front-yard fences tend to face the strictest limits of all, especially on corner lots. Confirm the limit for your specific location and whether your fence faces the street, a side yard, or the rear of the property, since the same parish can treat each differently.

HOA Rules and City Permits Can Both Apply

Traditional New Orleans home behind a front-yard fence

If your property sits inside a homeowners association or a planned community, you are likely dealing with two separate approval layers. The parish or city permit covers code compliance: safety, height, and placement. Your HOA’s architectural review covers aesthetics: approved materials, colors, and styles for your neighborhood. One does not replace the other, and skipping either can leave you with a fence you have to modify or remove later, so check both before you order materials.

Historic Districts and HDLC Review

New Orleans is unusual in how many of its neighborhoods fall under historic preservation review. Areas like the French Quarter, Garden District, Marigny, Bywater, and other historic districts typically require additional sign-off from the Historic District Landmarks Commission, or HDLC, on top of the standard permit. This review generally looks at materials, style, and height so a new fence fits the character of the block, and it can apply even to a straightforward wood or iron fence that would sail through approval elsewhere in the metro. If your property is near one of these districts, confirm your address against the historic boundaries before you design your fence. HDLC review often takes longer than a standard permit and can be particular about materials, so build that timeline into your plans up front.

Corner-Lot and Visibility Rules

Corner lots carry their own layer of rules in most parishes, generally tied to keeping sightlines clear for drivers and pedestrians near an intersection. These visibility or “sight triangle” requirements often limit how tall a fence can be near the corner itself, even if the same fence would be allowed at full height along the rest of the property line. Nobody wants a solid fence blocking the view of oncoming traffic at a stop sign. If you are fencing a corner lot, plan on a lower height or a more open style, such as aluminum pickets, near the intersection, and confirm the exact limits with your local permitting office before finalizing the layout.